NIHOPHAWA Autoclave with horizontal door, 155 – 2010 L (optional: sliding-door)

NIHOPHAWA Autoclave with horizontal door (155 – 2010 L)

Autoclave owns modern vacuum technology, modern design, easy to operate and configure based on purpose of use, suitable for clinics, hospitals, medical centers.

Vacuum technology, mordern design

Nihophawa autoclave with a capacity of 200 – 800L is the first choice for hospitals, medical centers, and provincial hospitals that have a high flow of medical examination and treatment traffic and use a large number of medical instruments.

Printer

• Automatically print parameters during the sterilization process, including:
• Name of User
• Address of User
• Product’s model
• Product’s Serial number
• Starting time of operation
• Time of performing sterilization cycles, temperature, pressure of each cycle
• Ending time of sterilization program
• Average temperature coefficient during sterilization (Ft).
• Average pressure coefficient during sterilization (Ft).
• Sterilization result: Pass or fail.
• Signature position of operator

Safety system

• The program automatically checks for errors and warnings, with warnings on TFT-LCD touchscreen
• Sterilization program is not selected
• Door of sterilization chamber is not closed or closed incorrectly
• No compressed air or lack of air: the device stops generating steam, stop working
• Vacuum pump is overloaded: the device stops working
• Insufficient water for the steam generator during the sterilization cycle
• Phase loss, phase reversal, too low power voltage
• Defective temperature sensor, defective pressure sensor
• The pressure of the steam generator exceeds 3.8 kgf/cm², the safety valve will automatically open
• The pressure of the sterilization chamber exceeds 2.8 kgf/cm², the safety valve will automatically open
• Lack of water supplying for vacuum device or without
• The safety latch automatically closes when the sterilization chamber has a pressure of ≥ 0.2 kgf/cm² and automatically opens when the pressure of sterilization chamber is balanced with the outside pressure.
• Warning for insufficient pressure of steam generation chamber.
• The device automatically stops when completing the sterilization program and the pressure in the chamber is at a safe level of ± 0.1kgf/cm²
• There is an electric emergency stop button: the sterilizer chamber’s steam relief valve opens, the power is disconnected and the device stops working.

Mechanical emergency drain valve (even in case of power failure).