General introduction

  • Model: NIHOPHAWA – 06AT | 10AT
  • Brand: NIHHOPHAWA
  • Quality management system standard: ISO9001:2015;

ISO14001:2015; ISO13485:2016; TCVN 6792:2001; CE 93/42/EEC or equivalent

  • Certificate of free sale for medical equipment and devices in Vietnam No.: 28/2016/BYT-TB-CT on 26th May, 2016.
REQUEST A QUOTE
Xử lý rác thải rắn

MEDICAL WASTE TREATMENT SYSTEM 6 – 10 KG/DAY

Using saturated steam at high temperature for sterilization combined with cutting and grinding, average capacity: 6 kg/cycle

Xử lý rác thải rắn

Configuration:

  • Waste sterilizer: 01 Set
  • Main unit (integrated vacuum pump, heat exchanger): 01 unit
  • Enclosed accessories:
  • Steamed basket, made of stainless steel with handle (dimensions ≤ (380 x260) mm): 02 pcs
  • Power cord: 01 pc
  • Ground wire: 02 m.
  • Operating procedure: 01 book

Medical waste grinder: 01 set

TECHNICAL INFORMATION

Sterilization chamber:

  • Vertical cylinder or other
  • Made of SUS 304 stainless steel

Lid:

  • Manual opening/closing operation integrated with damping system and bearing balls
  • Made of SUS 304 stainless steel
  • Sealed with heat-resistant silicone rubber gasket

Housing:

  • Rectangular prism or other
  • The upper is made of SUS 304 stainless steel
  • Housing and the remaining are made of powder-coated steel.

Interlock:

  • Interlock with central screw, easy to lock.
  • The lid is locked tightly during operation

Drain the water after the sterilization cycle ends: The drain hose is attached to the device that can be connected to a normal discharge line.

Standard cooling:

  • Cooling by specialized vacuum pump
  • The device can lower temperature to the safety level of 80 °C – 90 °C in shorter time.
  • Timer mode: starting time of operation can be set in day, hour, minute.
  • Pre-vacuum pump
  • Dry with an oil-free vacuum pump
  • Flow: 90 L/min

After sterilization, the vacuum pump will suck the moisture out, sterilized objects will be dried.

5/5 (1 Review)