Infusion pump MJ200 - TOP Japan

New technology, modern design.

• Model: MJ-200
• Manufacturer: Top – Japan
• Factory: Meditop – Malaysia
• Origin: Malaysia
• 100% new equipment, since 2019.
• Certificate of quality management system standard: ISO 13485, EC, CFS. The device has EC certificate with CE marking labeled on it.

Configuration:

• Main unit: 01 unit
• AC power cord: 01 pc
• Battery: 01 pc
• Connector (BF or C-2): 01 pc
• User’s manual: 01 set

Infusion rate

• Normal mode: from 100 to 999 ml/h with an increment of 1 ml/h. Micro mode: from 0.1 to 99.9 ml/h with an increment of 0.1 ml/h

Alarm/warning:

• High-priority warnings: *air bubbles, *downstream occlusion, *upstream occlusion, occlusion clamp, auto power-off, power failure, * System failure.
• Low priority warnings: Low battery, Reminder, maintenance timer, End of infusion.
• Information: Failure to determine the flow rate, check the settings, reverse the supply current, the door is open, enclosed object cannot be detected.

Transport and storage conditions:

• Ambient temperature: -20 to ≥ 45 ° C
• Relative humidity: 10 to 95%, no condensing

Ambient pressure: 50 to 106 kPa.